กรุณาใช้ตัวระบุนี้เพื่ออ้างอิงหรือเชื่อมต่อรายการนี้: https://buuir.buu.ac.th/xmlui/handle/1234567890/9773
ระเบียนเมทาดาทาแบบเต็ม
ฟิลด์ DC ค่าภาษา
dc.contributor.advisorธีรยุทธ์ เสงี่ยมศักดิ์
dc.contributor.advisorทนงศักดิ์ ยิ่งรัตนสุข
dc.contributor.authorอธิพันธ์ ลอยเมืองกลาง
dc.contributor.otherมหาวิทยาลัยบูรพา. คณะสาธารณสุขศาสตร์
dc.date.accessioned2023-09-18T07:12:46Z
dc.date.available2023-09-18T07:12:46Z
dc.date.issued2561
dc.identifier.urihttps://buuir.buu.ac.th/xmlui/handle/1234567890/9773
dc.descriptionวิทยานิพนธ์ (วท.ม.)--มหาวิทยาลัยบูรพา, 2561
dc.description.abstractงานวิจัยนี้เป็นการศึกษาประสิทธิผลของการปรับปรุงระบบกำจัดฝุ่นไม้ซึ่งทำการศึกษาทดลองกับเครื่องขัดงานไม้โดยการใช้หลักการแนวคิด และวิธีการออกแบบทางวิศวกรรมมาช่วยในการคำนวณค่าอัตราการไหลของอากาศขนาด และความยาวของท่อนำอากาศ โดยคำนึงถึงคุณสมบัติของวัสดุนั้น ๆ ต้นทุน รวมถึงสามารถผลิตใช้งานได้จริงและทำการเปรียบเทียบประสิทธิผลของการระบายฝุ่นไม้ด้วยการตรวจวัดปริมาณความเข้มข้นของฝุ่นไม้แบบฝุ่นรวม (Total dust) ก่อนและหลังการติดตั้งระบบระบายอากาศให้เป็นไปตามมาตรฐานตามวิธีการของ NIOSH 0500 (National Institute of Occupational Health and Safety [NIOSH], 1994) ซี่งแบ่งชนิดของตัวอย่างฝุ่นไม้ออกเป็น 3 ประเภท ได้แก่ ไม้เนื้อแข็ง ไม้เนื้ออ่อน และแผ่น ไม้ผสม ผลที่ได้จากการศึกษาพบว่า ปริมาณความเข้มข้นของฝุ่นไม้ทั้ง 3 ประเภท ชนิดของแผ่นไม้ผสม มีประสิทธิผลของการกำจัดฝุ่นไม้มากที่สุด โดยมีปริมาณฝุ่นไม้ลดลงโดยเฉลี่ย 87 เปอร์เซ็นต์ชนิดของไม้เนื้ออ่อนมีปริมาณฝุ่นไม้ลดลงโดยเฉลี่ย 66 เปอร์เซ็นต์ชนิดของไม้เนื้อแข็ง มีปริมาณฝุ่นไม้ลดลงโดยเฉลี่ย 59 เปอร์เซ็นต์ตามลำดับ ซึ่งหลังจากการทดลองพบว่าสามารถลดต้นทุนในการจัดสร้างได้มากและยังสามารถนำไปพัฒนาใช้เป็นมาตรฐานสำหรับการควบคุมฝุ่นไม้ในโรงฝึกงานต่อไป
dc.language.isoth
dc.publisherคณะสาธารณสุขศาสตร์ มหาวิทยาลัยบูรพา
dc.rightsมหาวิทยาลัยบูรพา
dc.subjectฝุ่น -- การกำจัด
dc.subjectการควบคุมฝุ่น
dc.subjectฝุ่น
dc.subjectมหาวิทยาลัยบูรพา -- สาขาวิชาอาชีวอนามัยและความปลอดภัย
dc.titleการปรับปรุงระบบกำจัดฝุ่นไม้ในโรงฝึกงานวิชาอุตสาหกรรมของโรงเรียนแห่งหนึ่งในเขตกรุงเทพมหานคร
dc.title.alternativeImprovement of wood dust ventiltion system in the workshop of industril trining school in Bngkok
dc.typeวิทยานิพนธ์/ Thesis
dc.description.abstractalternativeThis research aimed to determine the effectiveness of the improvement wood dust ventilation system. The experiment was conducted on wood sanding machines by using the principles, concepts and engineering design methods to calculate the air flow rate, size and length of the air duct. The design was conducted by considering properties of the material and comparing the effectiveness of wood dust ventilation by measuring the concentration of wood dust (Total dust) before and after the installation of the ventilation system - according to NIOSH Method 0500 (NIOSH, 1994), wood dust samples included hardwood, softwood and manufactured board. The results of the study showed that the concentration of all three types of wood dust decreased. Manufactured board had the highest reduction by 87 percent. Softwood had reduction by 66 percent. Hardwood had the lowest reduction by 59 percent. The experiment found that the cost of ventilation construction was low. It can be used as a standard for further control of wood dust in the workshop.
dc.degree.levelปริญญาโท
dc.degree.disciplineอาชีวอนามัยและความปลอดภัย
dc.degree.nameวิทยาศาสตรมหาบัณฑิต
dc.degree.grantorมหาวิทยาลัยบูรพา
ปรากฏในกลุ่มข้อมูล:I-thesis

แฟ้มในรายการข้อมูลนี้:
แฟ้ม รายละเอียด ขนาดรูปแบบ 
59920295.pdf3.96 MBAdobe PDFดู/เปิด


รายการทั้งหมดในระบบคิดีได้รับการคุ้มครองลิขสิทธิ์ มีการสงวนสิทธิ์เว้นแต่ที่ระบุไว้เป็นอื่น